ST-LINK Programmer

پروگرامر Programmer ST-LINK V2 ST

پروگرامر و دیباگر ST-LINK V2 مخصوص تراشه های STM8 و STM32 ساخت شرکت STبا توجه به اینکه این پروگرامر ساخت خود شرکت  STمی باشد بنابراین قابلیت کار با کامپایلرهای KEIL ,IAR را دارد. از جمله ویژگی های این پروگرامر می توان به موارد زیر اشاره کرد:

• 5 V power supplied by a USB connector
• USB 2.0 full speed compatible interface
• USB standard A to mini B cable
• SWIM specific features
• 1.65 V to 5.5 V application voltage supported on SWIM interface
• SWIM low-speed and high-speed modes supported
• SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed
• SWIM cable for connection to the application via an ERNI standard vertical connector (ref: 284697 or 214017) or horizontal connector (ref: 214012)
• SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector
• JTAG/serial wire debugging (SWD) specific features
• 1.65 V to 3.6 V application voltage supported on the JTAG/SWD interface and 5 V tolerant inputs
• JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector
• JTAG supported
• SWD and serial wire viewer (SWV) communication supported
• Direct firmware update feature supported (DFU)
• Status LED which blinks during communication with the PC
• Operating temperature 0 to 50 °C
• 2500 VRMS high isolation voltage (ST-LINK/V2-ISOL only)